Mod C2 - Blade of forged SAE 9260 or AISI 440 "C", of 3/16" x 11/2" x 7" (5 x 38 x 175 mm). Light alloy guard and scales of Retamo.
This tactical knife is derived from the Command 1, resizing and with other construction, is not integral; is tapered full tang.
The guard is embedded and riveted on the blade and has no metal pommel.
These changes make it more practical and less expensive.
Weighs 330 g, much less that the C1 of 550 g.
The blade has three different cutting edges: the principal for all types of cutting, the tip bevel with an angle somewhat greater, and the rest of the spine with an angle and structure that allow to cutting steel wire with a single blow without damage.
Especially for the kitchen and the grill.
Mod CH2 - Blade of AISI 420 of 5/32" x 2" x 61/4" (4 x 50 x 160 mm).
Scales
of Retamo, lock with Quebracho pins, with Algarrobo support for the kitchen table or wall hanging.
Depending the tastes and habits of use can be made with a blade slightly longer and/or narrower, ie different proportions.
When I say cleanliness and prolixity I refer to the definition of edges and bevels of the blade, that should not be rounded.
The planes must be "flat"and not wavy or convex.
The surfaces must be completely free of scratches.
The guard and the handle should be perfectly trimmed.
